Boiler Installation in a Greenwich home by Future Home Energy
Gas Safe Registered • Covering SE3, SE7, SE9, SE10, SE18, SE28

Boiler Installation in Greenwich

Gas Safe registered engineers working right across the Royal Borough of Greenwich, from the Georgian terraces of West Greenwich to the interwar semis of Eltham and the new-build flats on the Peninsula.

07538 192738
Gas Safe
Registered Engineers
12 Year
Guarantee Available
1 Day
Typical Install
0% APR
Finance Available
South East London

Boiler Installation in Greenwich

Greenwich is one of the hardest boroughs in London to fit a boiler in well, and the reason has nothing to do with the boiler. It is the buildings. Within about three miles you go from Grade II listed Georgian townhouses under Article 4 control, to 1930s semis with original gravity-fed systems, to Peninsula apartments on communal heat networks where the plant is not yours to touch. The same appliance is right in one and wrong in the next.

That is why we survey before we quote in Greenwich rather than pricing off a phone call. A three-storey terrace off Royal Hill with one bathroom and a loft conversion pending needs a different answer from a two-bed flat in Kidbrooke Village. We measure the heat loss, look at where the flue can legally terminate, check the incoming gas supply is up to the load, and then give you a fixed price that accounts for what the survey found.

For boiler repairs in Greenwich we carry the parts that actually fail on the boilers actually installed here, which after twenty-odd years of Worcester Bosch, Vaillant and Baxi in this part of South East London is a fairly predictable list. Most repairs are finished on the first visit. If a part has to come in, we tell you the day it will be fitted rather than leaving you to chase it.

Local Detail

Property Types Across Greenwich

Four broad types of property cover most of the borough, and each one changes the job in a way worth knowing about before you get quotes.

Georgian & Victorian Terraces

West Greenwich, the Ashburnham Triangle, Blackheath and Westcombe Park. Solid walls, no cavity, original chimney breasts and almost no loft to run pipework through. Heat loss is high, so these houses are routinely under-boilered by installers who size off the old appliance. Flue termination is the real constraint, not the boiler.

Interwar Semis in Eltham & New Eltham

Well Hall, the Progress Estate and the 1930s ribbon development around Eltham. Most still have a hot water cylinder in the airing cupboard and a cold tank in the loft, often on original gravity circulation. A combi conversion here reclaims two cupboards and a loft, but only if the incoming main can deliver the flow rate.

Peninsula & Kidbrooke New-Builds

Greenwich Peninsula, Kidbrooke Village and the Woolwich riverside. Many are on communal heat networks with a heat interface unit rather than a boiler, which is a different job entirely. Where there is an individual boiler it sits in a shallow utility cupboard with a fixed flue route and a freeholder who must consent before anything changes.

Post-War & Ex-Council Stock

Woolwich, Plumstead, Thamesmead and Abbey Wood. Long horizontal pipe runs, microbore in places, and radiators sized for a system that ran far hotter than a modern condensing boiler will. Running the new boiler at a low enough flow temperature to actually condense usually means upsizing two or three radiators, and we price that in rather than discovering it afterwards.

Worth Knowing

What’s Different About Greenwich

Planning constraint is the single biggest variable on a Greenwich boiler installation, and it is the one most quotes ignore until the engineer is on the doorstep.

23 Conservation Areas & Article 4 Control

Greenwich has 23 conservation areas, several of which sit inside the Maritime Greenwich World Heritage Site buffer zone. West Greenwich, East Greenwich and the Ashburnham Triangle carry Article 4 directions, which strip out permitted development rights for most external alterations. In any conservation area a flue may not go on the principal elevation, or a side elevation fronting a highway. We establish where it can go at the survey.

542 Listed Buildings

There are 542 listed buildings in the borough. Listed building consent is required for external work regardless of permitted development, and that includes a new flue penetration. If your property is listed we will tell you at the survey and we will not start work until consent is in place.

Hard Water Across the Borough

Greenwich sits in one of the hardest water areas in the country. Scale is what kills plate heat exchangers in combi boilers, and it is why every installation we do here leaves with a magnetic system filter and the correct inhibitor dose. It is also why an annual service in this borough is not optional maintenance, it is what keeps the warranty valid.

Access, Parking & ULEZ

Controlled parking zones around Greenwich town centre, the station and Blackheath standard, and permit arrangements vary street by street. Our vans are ULEZ compliant, and we sort parking ourselves. We just ask that you tell us at booking if your street is permit-only so we can plan for it rather than lose half an hour on arrival.

Coverage

Where We Work in Greenwich

Postcode Districts
  • SE2
  • SE3
  • SE7
  • SE8
  • SE9
  • SE10
  • SE18
  • SE28
Neighbourhoods
  • Greenwich
  • Blackheath
  • Charlton
  • Westcombe Park
  • Greenwich Peninsula
  • Woolwich
  • Plumstead
  • Shooters Hill
  • Eltham
  • New Eltham
  • Kidbrooke
  • Abbey Wood
  • Thamesmead
  • Ashburnham Triangle

Read more about boiler installation across London, or see every area we cover.

Common Questions

Boiler Installation in Greenwich FAQ

Do you cover the whole of the Royal Borough of Greenwich?
Yes. We work across SE10 Greenwich, SE3 Blackheath, SE7 Charlton, SE18 Woolwich and Plumstead, SE9 Eltham, SE28 Thamesmead and SE2 Abbey Wood, plus the parts of SE8 and the Kidbrooke and Peninsula developments that fall inside the borough. If you are not sure which side of a boundary you are on, call 07538 192738 and we will tell you straight away.
Can I have a boiler flue fitted in a Greenwich conservation area?
Usually yes, but not anywhere you like. In a conservation area a flue must not be fitted on the principal elevation, or on a side elevation that fronts a highway, so it normally goes to the rear or onto a flank wall that is not publicly visible. West Greenwich, East Greenwich and the Ashburnham Triangle also carry Article 4 directions, which remove permitted development rights for most external alterations. We check your property's status at the survey and design the flue route around it before you commit to anything.
My Greenwich property is listed. Can you still replace the boiler?
Yes, but the work needs listed building consent because a new flue is an external alteration. There are 542 listed buildings in the borough and we have worked in plenty of them. We identify the constraint at the survey, tell you exactly what consent is needed, and hold the installation date until it is granted. What we will not do is fit it first and hope nobody notices, because that is your problem to unpick, not ours.
How quickly can you get to a boiler breakdown in Greenwich?
For no heating or no hot water we aim to be with you the same day where the call comes in during the morning, and next day otherwise. Greenwich is well inside our regular working area rather than an outlying job we squeeze in, which is what makes that realistic. Call 07538 192738 rather than emailing if the boiler is actually down.
Should I fit a combi boiler in a Victorian terrace in Greenwich?
It depends on the incoming water main and how many bathrooms you run. A combi takes its hot water straight off the mains, so in a three-storey terrace with two bathrooms and low mains pressure it will disappoint you every morning. In that case a system boiler with an unvented cylinder is the right answer even though it costs more. We measure the static pressure and flow rate at the survey and tell you which one your house can actually support.
Do you work on the communal heating systems on Greenwich Peninsula?
We work on what is inside your flat. Many Peninsula and Kidbrooke apartments run off a communal heat network through a heat interface unit rather than an individual boiler, and the network plant itself is the building managers' responsibility, not something an individual leaseholder can appoint us to alter. We can service and repair the equipment inside your property, fit smart controls to it, and tell you honestly when a problem sits on the landlord's side of the line.
How much is a boiler service in Greenwich?
An annual boiler service is £79 and a landlord CP12 gas safety certificate is £69. That is the price of the visit, not a call-out fee with the work added afterwards. Given how hard the water is in this borough, an annual service is also what keeps a manufacturer warranty valid, so it is worth booking before the warranty lapses rather than after.
Do you charge for a quote in Greenwich?
No. The survey and the quote are free, and the quote is a fixed price rather than an estimate that moves once work starts. We would rather spend an hour at your property working out what the job genuinely involves than give you a cheap number over the phone and revise it upwards on installation day.
Booking in Greenwich

Get a Fixed Price for Your Property

Free survey, fixed quote, no call-out fee. If it is urgent, ring us rather than filling in a form.

07538 192738Email Us
Also in Greenwich

Our Other Services in Greenwich

Same engineers, same fixed-price approach, same part of London.

Air Conditioning in Greenwich Boiler Service & Repairs in Greenwich Solar Panels in Greenwich Smart Thermostats in Greenwich
Nearby

Boiler Installation in Other Areas

Bexley Wimbledon South London All Areas We Cover